**For more customizable options, visit our Apex Systems Configuration Builder**
The Apex Vacuum Pressure Controller uses the Apex Controller, a Capacitance Diaphragm Gauge on the chamber and a cable to control an input pressure entered on the Apex PC. The Apex Pressure Controller can control 3 decades below the full scale value of the CDG from 1000 torr down to 1 torr. The Capacitence Diaphragm Gauge Full Scale Ranges are 1000 torr, 100 torr, 10 torr, 1 torr and 0.1 torr.
The Vacuum Pressure Controller is accurate to +/-0.5% of FS and repeatable to +/-0.5% of full scale.
A 115V/60Hz power cable(PVPS24U) is provided to power the unit.
The Apex Mass Pressure Controller can be set via the on-board display
Input and Output are a standard 0-5V. If you want other options, you can customize those in our Apex Systems Configuration Builder. For the end user, flows can be read and the controller set via the on-board display. FlowVision Software can be purchased for using a computer to record and graph the flows. The gas selection can also be made from the computer.
For use with a system, a 6 ft. cable(DC-61) or a 25 ft. cable(DC-251) can be purchased in the communication cable section. One end is the 9 pin Din connector to connect to the Apex MFC, while the other end are blank wires.
System consists of:
Apex Pressure Controller with quick adjustment fine resolution valve
Oerlikon Leybold Capacitence Diaphragm Gauge
Cable between the Controller and Gauge
Power Supply-PVPS24U Plug In with International Plug Set